IES Show Commands
7210-SAS M Services Guide Page 707
Sample output (split horizon group)
*A:SASM>show>service# id 10 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 10 Vpn Id : 0
Service Type : VPLS
Description : (Not Specified)
Customer Id : 1
Last Status Change: 07/22/2011 11:06:02
Last Mgmt Change : 07/22/2011 11:04:51
Admin State : Up Oper State : Up
MTU : 1450
MTU Check : Enabled
SAP Count : 2 SDP Bind Count : 2
Snd Flush on Fail : Disabled
Uplink Type: : MPLS
-------------------------------------------------------------------------------
Split Horizon Group specifics
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Split Horizon Group : test
-------------------------------------------------------------------------------
Description : test
Instance Id : 1 Last Change : 07/23/2011 11:40:50
-------------------------------------------------------------------------------
Offered Hi Prior-
ity
The number of high priority packets, as determined by the SAP ingress
QoS policy.
Offered Low Prior-
ity
The number of low priority packets, as determined by the SAP ingress
QoS policy.
Forwarded In Pro-
file
The number of in-profile packets or octets (rate below CIR) forwarded.
Forwarded Out Pro-
file
The number of out-of-profile packets or octets (rate above CIR) for-
warded.
Split Horizon Group Specifics
Split Horizon
Group
Displays the name of the split horizon group.
Description Displays the description of the split horizon group.
Instance Id Displays the Instance identifier of the split horizon
group.
Last Change Displays the date and time of most recent change to
the split horizon group.
Split Horizon
Group
Displays the name of the split horizon group the SAP
or Spoke SDP is associated.
Label Description (Continued)