EasyManua.ls Logo

Alcatel-Lucent 7210 SAS M - Page 713

Alcatel-Lucent 7210 SAS M
952 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IES Show Commands
7210-SAS M Services Guide Page 713
For. InProf : 0 0
For. OutProf : 0 0
-------------------------------------------------------------------------------
VPLS Spanning Tree Information
-------------------------------------------------------------------------------
VPLS oper state : Up Core Connectivity : Down
Stp Admin State : Up Stp Oper State : Up
Mode : Rstp Vcp Active Prot. : N/A
Bridge Id : 80:02.00:25:ba:04:37:10 Bridge Instance Id: 2
Bridge Priority : 32768 Tx Hold Count : 6
Topology Change : Inactive Bridge Hello Time : 2
Last Top. Change : 1d 00:38:51 Bridge Max Age : 20
Top. Change Count : 1 Bridge Fwd Delay : 15
Root Bridge : 80:01.00:25:ba:02:de:90
Primary Bridge : N/A
Root Path Cost : 10 Root Forward Delay: 15
Rcvd Hello Time : 2 Root Max Age : 20
Root Priority : 32769 Root Port : 2050
-------------------------------------------------------------------------------
Forwarding Database specifics
-------------------------------------------------------------------------------
Service Id : 10 Mac Move : Disabled
Mac Move Rate : 2 Mac Move Timeout : 10
Mac Move Retries : 3
Table Size : 250 Total Count : 2
Learned Count : 0 Static Count : 2
Remote Age : 900 Local Age : 300
High Watermark : 95% Low Watermark : 90%
Mac Learning : Enabled Discard Unknown : Disabled
Mac Aging : Enabled Relearn Only : False
-------------------------------------------------------------------------------
Service Endpoints
-------------------------------------------------------------------------------
Endpoint name : e1
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Ignore Standby Signaling : false
Suppress Standby Signaling : false
Block On Mesh Fail : false
Tx Active : none
Tx Active Up Time : 0d 00:00:00
Revert Time Count Down : N/A
Tx Active Change Count : 0
Last Tx Active Change : 07/22/2011 11:04:50
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
No members found.
===============================================================================
Endpoint name : e2
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Ignore Standby Signaling : false

Table of Contents

Other manuals for Alcatel-Lucent 7210 SAS M

Related product manuals