Alcatel-Lucent 7210 SAS M - Page 730

Show, Clear, Debug Commands
Page 730 7210-SAS M Services Guide
interface — Display service interfaces.
labels — Display labels being used by this service.
sap — Display SAPs associated to the service.
sdp — Display SDPs associated with the service.
split-horizon-group — Display split horizon group information.
stp — Display STP information.
all
Syntax all
Context show>service>id
Description Displays detailed information for all aspects of the service.
Output Sample Output
*A:7210SAS>show>service>id# all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 1 Vpn Id : 0
Service Type : Epipe
Description : (Not Specified)
Customer Id : 1
Last Status Change: 02/12/2002 23:51:07
Last Mgmt Change : 02/12/2002 23:50:18
Admin State : Up Oper State : Up
SAP Count : 2
Uplink Type: : L2
SAP Type: : Any Customer vlan: : n/a
-------------------------------------------------------------------------------
Service Access Points
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SAP 1/1/9:600.*
-------------------------------------------------------------------------------
Service Id : 1
SAP : 1/1/9:600.* Encap : qinq
QinQ Dot1p : Default
Description : (Not Specified)
Admin State : Up Oper State : Up
Flags : None
Last Status Change : 02/12/2002 23:51:06
Last Mgmt Change : 02/12/2002 23:50:18
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100
Admin MTU : 9212 Oper MTU : 9212
Ingr IP Fltr-Id : n/a Egr IP Fltr-Id : n/a
Ingr Mac Fltr-Id : n/a Egr Mac Fltr-Id : n/a
Ingr IPv6 Fltr-Id : n/a Egr IPv6 Fltr-Id : n/a
tod-suite : None