Alcatel-Lucent 7210 SAS M Service Guide

Show, Clear, Debug Commands
Page 738 7210-SAS M Services Guide
mac ieee-address — Displays only ARP entries in the ARP table with the specified 48-bit MAC
address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff
where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Default All MAC addresses.
sap sap-id — Displays SAP information for the specified SAP ID. See Common CLI Command
Descriptions on page 939 for command syntax.
port id — Specifies matching service ARP entries associated with the specified IP interface.
ip-address — The IP address of the interface for which to display matching ARP entries.
Values 1.0.0.0 — 223.255.255.255
ip-int-name — The IP interface name for which to display matching ARPs.
Output Show Service-ID ARP — The following table describes show service-id ARP output fields.
Sample Output
*A:ALA-12# show service id 2 arp
==============================================================================
ARP Table
==============================================================================
IP Address MAC Address Type Age Interface Port
------------------------------------------------------------------------------
190.11.1.1 00:03:fa:00:08:22 Other 00:00:00 ies-100-190.11.1 1/1/11:0
==============================================================================
*A:ALA-12#
base
Syntax base
Context show>service>id
Label Description
Service ID
The service ID number.
MAC
The specified MAC address
Source-Identifier
The location the MAC is defined.
Type
Static — FDB entries created by management.
Learned — Dynamic entries created by the learning process.
OAM — Entries created by the OAM process.
Age
The time elapsed since the service was enabled.
Interface
The interface applied to the service.
Port
The port where the SAP is applied.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English