Alcatel-Lucent 7210 SAS M - Page 740

Show, Clear, Debug Commands
Page 740 7210-SAS M Services Guide
Service Type : VPRN
Customer Id : 1
Last Status Change: 02/01/2007 09:11:39
Last Mgmt Change : 02/01/2007 09:11:46
Admin State : Up Oper State : Down
Route Dist. : 10001:1
AS Number : 10000 Router Id : 10.10.10.103
ECMP : Enabled ECMP Max Routes : 8
Max Routes : No Limit Auto Bind : LDP
Vrf Target : target:10001:1
Vrf Import : vrfImpPolCust1
Vrf Export : vrfExpPolCust1
SAP Count : 1 SDP Bind Count : 18
------------------------------------------------------------------------------
Service Access & Destination Points
------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
------------------------------------------------------------------------------
sap:1/1/7:0 q-tag 1518 1518 Up Up
sdp:10:1 M(10.20.1.3) TLDP 4462 4462 Up TLDP Down
sdp:20:1 M(10.20.1.4) TLDP 4462 4462 Up TLDP Down
sdp:30:1 M(10.20.1.5) TLDP 4462 4462 Up TLDP Down
sdp:40:1 M(10.20.1.20) TLDP 1534 4462 Up Up
sdp:200:1 M(10.20.1.30) TLDP 1514 4462 Up Up
sdp:300:1 M(10.20.1.31) TLDP 4462 4462 Up TLDP Down
sdp:500:1 M(10.20.1.50) TLDP 4462 4462 Up TLDP Down
==============================================================================
*A:ALA-12#
statistics
Syntax statistics [sap sap-id]
statistics [sdp sdp-id:vc-id]
statistics [interface interface-name]
Context show>service>id>dhcp
Description Displays DHCP statistics information.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 939 for command syntax.
sdp-id — The SDP identifier.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Values 1 — 4294967295
interface interf ace-name — Displays information for the specified IP interface.
Show DHCP Statistics Output — The following table describes the output fields for DHCP
statistics.