Alcatel-Lucent 7210 SAS M Service Guide

Show, Clear, Debug Commands
Page 742 7210-SAS M Services Guide
interface
Syntax interface [ip-address | ip-int-name] [detail]
Context show>service>id
Description Displays information for the IP interfaces associated with the service.
If no optional parameters are specified, a summary of all IP interfaces associated to the service are
displayed.
Parameters ip-address — The IP address of the interface for which to display information.
Values 1.0.0.0 — 223.255.255.255
ip-int-name — The IP interface name for which to display information.
detail — Displays detailed IP interface information.
Default IP interface summary output.
Output Show Service-ID Interface — The following table describes show service-id interface output
fields:
Label Description
Interface-Name
The name used to refer to the interface.
Type
Specifies the interface type.
IP-Address
Specifies the IP address/IP subnet/broadcast address of the interface.
Adm
The desired state of the interface.
Opr
The operating state of the interface.
Interface
If Name
The name used to refer to the interface.
Admin State
The desired state of the interface.
Oper State
The operating state of the interface.
IP Addr/mask
Specifies the IP address/IP subnet/broadcast address of the interface.
Details
If Index
The index corresponding to this interface. The primary index is 1. For
example, all interfaces are defined in the Base virtual router context.
If Type
Specifies the interface type.
Port Id
Specifies the SAP’s port ID.
SNTP B.Cast
Specifies whether SNTP broadcast client mode is enabled or disabled.
Arp Timeout
Specifies the timeout for an ARP entry learned on the
interface.
MAC Address
Specifies the 48-bit IEEE 802.3 MAC address.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English