Alcatel-Lucent 7210 SAS M Service Guide

VPRN Show Commands
7210-SAS M Services Guide Page 745
sap
Syntax sap sap-id [detail]]
Context show>service>id
Description Displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap-id — The ID that displays SAPs for the service. See Common CLI Command Descriptions on
page 939 for command syntax.
detail — Displays detailed information for the SAP.
Output Show Service-ID SAP — The following table describes show service SAP fields:
Sample Output
Label Description
Service Id
The service identifier.
SAP
The SAP and qtag.
Encap
The encapsulation type of the SAP.
Ethertype
Specifies an Ethernet type II Ethertype value.
Admin State
The administrative state of the SAP.
Oper State
The operating state of the SAP.
Flags
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown,
SapIngressQoSMismatch, SapEgressQoSMismatch,RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr,
TodResourceUnavail, TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing, ServiceMTUTooS-
mall, SapIngressNamedPoolMismatch, SapEgressNamedPoolMis-
match, NoSapEpipeRingNode.
Last Status Change
Specifies the time of the most recent operating status change to this
SAP
Last Mgmt Change
Specifies the time of the most recent management-initiated change to
this SAP.
Admin MTU
The desired largest service frame size (in octets) that can be transmitted
through the SAP to the far-end router, without requiring the packet to be
fragmented.
Oper MTU
The actual largest service frame size (in octets) that can be transmitted
through the SAP to the far-end router, without requiring the packet to be
fragmented.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English