Show, Clear, Debug Commands
Page 766 7210-SAS M Services Guide
connectRetry — Connect retry timer expired.
holdTime — Hold time timer expired.
keepAlive — Keepalive timer expired.
recvOpen — Receive an OPEN message.
revKeepalive — Receive an KEEPALIVE message.
recvUpdate — Receive an UPDATE message.
recvNotify — Receive an NOTIFICATION message.
None — No events have occurred.
Last Error
Displays the last BGP error and sub-code to occur on the BGP neigh-
bor.
Connect Retry
The configured or inherited connect retry timer value.
Local Pref.
The configured or inherited local preference value.
Min Route Advt.
The minimum amount of time that must pass between route updates for
the same IP prefix.
Min AS Originate
The minimum amount of time that must pass between updates for a
route originated by the local router.
Multihop
The maximum number of router hops a BGP connection can traverse.
Multipath
The configured or inherited multipath value, determining the maxi-
mum number of ECMP routes BGP can advertise to the RTM.
Damping
Disabled — BGP neighbor is configured not to dampen route
flaps.
Enabled — BGP neighbor is configured to dampen route flaps.
Loop Detect
Ignore — The BGP neighbor is configured to ignore routes with an
AS loop.
Drop — The BGP neighbor is configured to drop the BGP peering if
an AS loop is detected.
Off — AS loop detection is disabled for the neighbor.
MED Out
The configured or inherited MED value assigned to advertised routes
without a MED attribute.
Authentication
None — No authentication is configured.
MD5 — MD5 authentication is configured.
Label Description (Continued)