VPRN Show Commands
7210-SAS M Services Guide Page 769
*A:ALA-12# show router 3 bgp neighbor detail
===============================================================================
BGP Neighbor (detail)
===============================================================================
-------------------------------------------------------------------------------
Peer : 10.0.0.15 Group : To_AS_40000
-------------------------------------------------------------------------------
Peer AS : 65205
Peer Address : 10.0.0.15 Peer Port : 0
Local AS : 65206
Local Address : 10.0.0.16 Local Port : 0
Peer Type : External
State : Active Last State : Connect
Last Event : openFail
Last Error : Hold Timer Expire
Connect Retry : 20 Local Pref. : 100
Min Route Advt. : 30 Min AS Orig. : 15
Multipath : 1 Multihop : 5
Damping : Disabled Loop Detect : Ignore
MED Out : No MED Out Authentication : None
Next Hop Self : Disabled AggregatorID Zero: Disabled
Remove Private : Disabled Passive : Disabled
Prefix Limit : No Limit
Hold Time : 90 Keep Alive : 30
Active Hold Time : 0 Active Keep Alive: 0
Cluster Id : None Client Reflect : Enabled
Preference : 170 Num of Flaps : 0
Recd. Prefixes : 0 Active Prefixes : 0
Recd. Paths : 0 Suppressed Paths : 0
Input Queue : 0 Output Queue : 0
i/p Messages : 0 o/p Messages : 0
i/p Octets : 0 o/p Octets : 0
i/p Updates : 0 o/p Updates : 0
Export Policy : direct2bgp
===============================================================================
*A:ALA-12#
Output Show Advertised and Received Routes Output — The following table describes the
command output fields for both the standard and detailed information for a neighbor:
Label Description
BGP Router ID
The local BGP router ID.
AS
The configured autonomous system number.
Local AS
The configured local AS setting. If not configured, then it is the same
value as the AS.
Flag
u — used
s — suppressed
h — history
To Next Page
Loading...
Need help?
General
