Alcatel-Lucent 7210 SAS M Service Guide

Show, Clear, Debug Commands
Page 774 7210-SAS M Services Guide
as-number2 0 — 4294967295
well-known-comm no-export, no-export-subconfed, no-advertise
Output Show BGP Routes — The following table describes the command output fields for BGP routes.
Label Description
BGP Router ID
The local BGP router ID.
AS
The configured autonomous system number.
Local AS
The configured local AS setting, if not configured it is the same as the
system AS.
Network
The IP prefix and mask length.
Nexthop
The BGP nexthop.
From
The advertising BGP neighbor’s IP address.
Res. Nexthop
The resolved nexthop.
Local Pref.
The local preference value.
Flag
u — used
s — suppressed
h — history
d — decayed
* — valid
i — igp
e — egp
? — incomplete
> — best
Aggregator AS
The aggregator AS value.
none — No aggregator AS attributes are present.
Aggregator
The aggregator attribute value.
none — no Aggregator attributes are present.
Atomic Aggr.
Atomic — The atomic aggregator flag is set.
Not Atomic — The atomic aggregator flag is not set.
MED
The MED metric value.
none — No MED metric is present.
Community
The BGP community attribute list.
Cluster
The route reflector cluster list.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English