Alcatel-Lucent 7210 SAS M Service Guide

VPRN Show Commands
7210-SAS M Services Guide Page 779
interface
Syntax interface [{[<ip-address|ip-int-name>][detail]}|summary]
Context show>router
Description This command displays the router IP interface table sorted by interface index.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
ip-int-name — Only displays the interface information associated with the specified IP interface
name.
detail — Displays detailed IP interface information.
summary — Displays summary IP interface information for the router.
— Standard IP Interface Output — The following table describes the standard output fields for
an IP interface:
Sample Output
*A:7210SAS>show>router interface i1 detail
===============================================================================
Interface Table (Router: Base)
===============================================================================
-------------------------------------------------------------------------------
Label Description
Interface-Name
The IP interface name.
Type
n/a — No IP address has been assigned to the IP interface, so the IP
address type is not applicable.
Pri — The IP address for the IP interface is the Primary address on
the IP interface.
Sec — The IP address for the IP interface is a secondary address on
the IP interface.
IP-Address
The IP address and subnet mask length of the IP interface.
n/a — Indicates no IP address has been assigned to the IP interface.
Adm
Down — The IP interface is administratively disabled.
Up — The IP interface is administratively enabled.
Opr
Down — The IP interface is operationally disabled.
Up — The IP interface is operationally enabled.
Mode
Network — The IP interface is a network/core IP interface.
Service — The IP interface is a service IP interface.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English