Alcatel-Lucent 7210 SAS M - Page 797

VPRN Debug Commands
7210-SAS M Services Guide Page 797
The no form of the command disables debugging.
event-type
Syntax [no] event-type {config-change | svc-oper-status-change | sap-oper-status-change |
sdpbind-oper-status-change}
Context debug>service>id
Description This command enables debugging for a particular event type.
The no form of the command disables debugging.
event-type
Syntax [no] event-type {config-change | oper-status-change}
Context debug>service>id>sap
Description This command enables debugging for a particular event type.
The no form of the command disables debugging.
stp
Syntax [no] stp
Context debug>service>id
Description This command enables the context for debugging STP.
The no form of the command disables debugging.
all-events
Syntax all-events
Context debug>service>id>stp
Description This command enables STP debugging for all events.
The no form of the command disables debugging.
bpdu
Syntax [no] bpdu
Context debug>service>stp
Description This command enables STP debugging for received and transmitted BPDUs.