VLL Show Commands
7210 SAS M Services Guide Page 813
id
Syntax id service-id {all | arp | base | endpoint | fdb | interface | label | labels | sap | split-
horizon-group | stp| interface | mstp-configuration}
Context show>service
Description This command displays information for a particular service-id.
Parameters service-id — The service identification number that identifies the service in the domain.
Values service-id: 1 — 214748364
svc-name: A string up to 64 characters in length.
all — Display detailed information about the service.
arp — Display ARP entries for the service.
base — Display basic service information.
endpoint — Display service endpoint information.
fdb — Display FDB information.
interface — Display service interfaces.
labels — Display labels being used by this service.
mstp-configuration — Display MSTP information.
sap — Display SAPs associated to the service.
sdp — Display SDPs associated with the service.
split-horizon-group — Display split horizon group information.
stp — Display STP information.
Sample Output
*A:ces-A# show service id 1 sap
=========================================================================
SAP(Summary), Service 1
=========================================================================
PortId SvcId Ing. Ing. Egr. Adm Opr
QoS Fltr Fltr
-------------------------------------------------------------------------
1/2/1.1 1 1 none none Up Up
-------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------
=========================================================================
*A:ces-A# show service id 1 base
===============================================================================
Service Basic Information
===============================================================================
Service Id : 1 Vpn Id : 0
Service Type : Cpipe VLL Type : SAToPT1
Description : (Not Specified)
Customer Id : 1