Alcatel-Lucent 7210 SAS M Service Guide

VLL Show Commands
7210 SAS M Services Guide Page 815
===============================================================================
*A:Dut-A>show#
all
Syntax all
Context show>service>id
Description This command displays detailed information for all aspects of the service.
Output Show service ID Output — The following table describes the output fields when the all option is
specified:
Label Description
Service Id
The service identifier.
VPN Id
The number which identifies the VPN.
Service Type
Specifies the type of service.
VLL Type
Specifies the VLL type.
SDP Id
The SDP identifier.
Description
Generic information about the service.
Customer Id
The customer identifier.
Last Mgmt Change
The date and time of the most recent management-initiated change.
Endpoint
Specifies the name of the service endpoint.
Flags
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, L2OperDown, RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr,
TodResourceUnavail, TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing, SapIngressNamed-
PoolMismatch, SapEgressNamedPoolMismatch, NoSapEpipeRing-
Node.
SAP Count
The number of SAPs specified for this service.
SDP Bind Count
The number of SDPs bound to this service.
Service Destination Points (SDPs)
SDP Id
The SDP identifier.
Type
Indicates whether this Service SDP binding is a spoke or a mesh.
Admin Path MTU
The desired largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to be
fragmented.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English