Alcatel-Lucent 7210 SAS M - Page 856

Show, Clear, Debug Commands
Page 856 7210 SAS M Services Guide
cem
Syntax cem
Context clear>service>statistics>id
Description Clears the statistics associated with the cpipe service.
sdp
Note : SDP commands are not supported by 7210 SAS-M devices configured in Access uplink mode.
Syntax sdp sdp-id keep-alive
Context clear>service>statistics
Description This command clears keepalive statistics associated with the SDP ID.
Parameters sdp-id — The SDP ID for which to clear keepalive statistics.
Values 1 — 17407
counters
Syntax counters
Context clear>service>statistics>id
Description This command clears all traffic queue counters associated with the service ID.
spoke-sdp
Syntax spoke-sdp sdp-id[:vc-id] {all | counters | stp}
Context clear>service>statistics>id
Description This command clears statistics for the spoke SDP bound to the service.
Parameters sdp-id — The spoke SDP ID for which to clear statistics.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be reset.
Values 1 — 4294967295
all — Clears all queue statistics and STP statistics associated with the SDP.
counters — Clears all queue statistics associated with the SDP.
stp — Clears all STP statistics associated with the SDP.