Alcatel-Lucent 7210 SAS M - Page 885

VPLS Show Commands
7210 SAS M Services Guide Page 885
MST region name :
Root Bridge : This Bridge
Primary Bridge : N/A
Root Path Cost : 0 Root Forward Delay: 15
Rcvd Hello Time : 2 Root Max Age : 20
Root Priority : 13 Root Port : N/A
-------------------------------------------------------------------------------
Forwarding Database specifics
-------------------------------------------------------------------------------
Service Id : 305 Mac Move : Disabled
Mac Move Rate : 2 Mac Move Timeout : 10
Table Size : 500 Total Count : 375
Learned Count : 375 Static Count : 0
Remote Age : 60 Local Age : 60
High WaterMark : 95% Low Watermark : 90%
Mac Learning : Enabl Discard Unknown : Dsabl
Mac Aging : Enabl Relearn Only : False
===============================================================================
A:Dut-A>config>service#
Sample output for 7210 SAS-M in access uplink mode:
*A:SAS-M-A0-2>show>service>id# all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 1 Vpn Id : 0
Service Type : VPLS
Description : (Not Specified)
Customer Id : 1
Last Status Change: 04/29/2001 06:59:15
Last Mgmt Change : 04/28/2001 03:03:03
Admin State : Up Oper State : Up
MTU : 1514
MTU Check : Enabled
SAP Count : 2 SDP Bind Count : 0
Snd Flush on Fail : Disabled
Uplink Type: : MPLS
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
Service Access Points
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
SAP 1/1/1:10.*
-------------------------------------------------------------------------------
Service Id : 1
SAP : 1/1/1:10.* Encap : qinq
QinQ Dot1p : Default
Description : (Not Specified)
Admin State : Up Oper State : Up
Flags : None
Last Status Change : 04/29/2001 06:59:15
Last Mgmt Change : 04/28/2001 03:09:30
Dot1Q Ethertype : 0x8100 QinQ Ethertype : 0x8100