Alcatel-Lucent 7210 SAS M Service Guide

VPLS Show Commands
7210 SAS M Services Guide Page 905
Link Type : Pt-pt BPDU Encap : Dot1d
Root Guard : Disabled Active Protocol : N/A
Last BPDU from : N/A
Designated Bridge : N/A Designated Port Id: 0
Fwd Transitions : 0 Bad BPDUs rcvd : 0
Cfg BPDUs rcvd : 0 Cfg BPDUs tx : 0
TCN BPDUs rcvd : 0 TCN BPDUs tx : 0
RST BPDUs rcvd : 0 RST BPDUs tx : 0
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
* indicates that the corresponding row element may have been truncated.
A:Dut-A>show>service>id#
split-horizon-group
Syntax split-horizon-group [group-name]
Context show>service>id
Description This command displays service split horizon groups.
stp
Syntax stp [detail]
Context show>service>id
Description This command displays information for the spanning tree protocol instance for the service.
Parameters detail — Displays detailed information.
Output Show Service-ID STP Output — The following table describes show service-id STP output
fields:
Label Description
Bridge-id
Specifies the MAC address used to identify this bridge in the network.
Bridge fwd delay
Specifies how fast a bridge changes its state when moving toward the
forwarding state.
Bridge Hello time
Specifies the amount of time between the transmission of Configura-
tion BPDUs.
Bridge max age
Specifies the maximum age of Spanning Tree Protocol information
learned from the network on any port before it is discarded. This is the
actual value that this bridge is currently using.
Bridge priority
Defines the priority of the Spanning Tree Protocol instance associated
with this service.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English