Alcatel-Lucent 7210 SAS M Service Guide

VPLS Show Commands
7210 SAS M Services Guide Page 913
IGMP Snooping Show Commands
igmp-snooping
Syntax igmp-snooping
Context show>service>id
Description This command enables the context to display IGMP snooping information.
all
Syntax all
Context show>service>id>igmp-snooping
Description This command displays detailed information for all aspects of IGMP snooping on the VPLS service.
Output Show All Service-ID — The following table describes the show all service-id command output
fields:
Label Description
Admin State
The administrative state of the IGMP instance.
Querier
Displays the address of the IGMP querier on the IP subnet to which the
interface is attached.
Sap or SDP Id
Displays the SAP or SDP IDs of the service ID.
Oper State
Displays the operational state of the SAP or SDP IDs of the service ID.
Mrtr Port
Specifies if the port is a multicast router port.
Send Queries
Specifies whether the send-queries command is enabled or disabled.
Max Num Groups
Specifies the maximum number of multicast groups that can be joined
on this SAP or SDP.
MVR From VPLS
Specifies MVR from VPLS.
Num MVR Groups
Specifies the actual number of multicast groups that can be joined on
this SAP or SDP.
MVR From VPLS Cfg
Drops
Displays the from VPLS drop count.
MVR To SAP Cfg
Drops
Displays the to SAP drop count.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English