Alcatel-Lucent 7210 SAS Series User Manual

Operational Commands
7210 SAS D, E, K OS Quality of Service Guide Page 323
src-port
Syntax src-port {eq} src-port-number
src-port range start end
no src-port
Context config>qos>sap-ingress>ip-criteria>entry>match
Description This command configures a source TCP or UDP port number or port range for a SAP QoS policy match
criterion.
The no form of this command removes the source port match criterion.
Default No src-port match criterion.
Parameters eq src-port-number — The TCP or UDP port numbers to match specified as equal to (eq) to the source port
value specified as a decimal integer.
Values 1 — 65535 (decimal hex or binary)
range start end — The range of TCP or UDP port values to match specified as between the start and end
source port values inclusive.
Values 1 — 65535 (decimal hex or binary)

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English