VPRN Services Command Reference
Page 440 7705 SAR OS Services Guide
— [no] shutdown
— snmp-community community-name [hash | hash2] [version SNMP-version]
—no snmp-community community-name [hash | hash2]
— source-address
— application app [ip-int-name | ip-address]
—no application app
— [no] spoke-sdp sdp-id
— [no] shutdown
— [no] static-route {ip-prefix/prefix-length | ip-prefix netmask}
[preference preference] [metric metric] [tag tag] [enable | disable]
{next-hop ip-int-name | ip-address | [bfd-enable | {cpe-check cpe-ip-address
[interval seconds] [drop-count count] [log]}]
— [no] static-r
oute {ip-prefix/prefix-length | ip-prefix netmask}
[preference preference] [metric metric] [tag tag] [enable | disable]
[cpe-check cpe-ip-address [interval seconds] [drop-count count] [log]]
— [no] static-route {ip-prefix/prefix-length | ip-prefix netmask}
[preference preference] [metric metric] [tag tag] [enable | disable] black-hole
— type hub
—no type
— vrf-export policy-name [policy-name...(up to 5 max)]
—no vrf-export
— vrf-import policy-name [policy-name...(up to 5
max)]
—no vrf-import
— vrf-target {ext-community | {[export ext-community] [import ext-community]}}
—no vrf-target
Interface Commands
config
—service
—vprn
— interface ip-int-name
—no interface ip-int-name
— address {ip-address/mask | ip-address netmask} [broadcast {all-ones |
host-ones}]
—no address
— allow-directed-broadcasts
—no allow-directed-broadcasts
— arp-timeout seconds
—no arp-timeout
— bfd transmit-interval [receive receive-interval] [multiplier multiplier]
[echo-receive echo-interval]
—no bfd
— description description-string
—no description
—dhcp
—icmp
— ip-mtu octets
—no ip-mtu
— ipcp
— dns ip-address [secondary ip-address]
— dns secondary ip-address