Allied Telesis IE340-20GP - Page 2027

C613-50631-01 Rev A Command Reference for IE340 Series 2027
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV4 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
(ACCESS-LIST EXTENDED TCP UDP FILTER)
Example 2
[adding to a list]
To insert a new entry with sequence number 5 into the access-list named ‘my-list’
that will accept UDP packets from 10.1.1.0/24 network to 192.168.1.0/24 network
on UDP port 80, use the commands:
awplus# configure terminal
awplus(config)# access-list extended my-list
awplus(config-ip-ext-acl)# 5 permit udp 10.1.1.0/24
192.168.1.0/24 eq 80
Related
commands
access-list extended (named)
access-list (extended numbered)
show interface access-group
show ip access-list
show running-config