Allied Telesis IE340-20GP - Page 3044

C613-50631-01 Rev A Command Reference for IE340 Series 3044
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
HOST
CLIENT-ID
Output Figure 58-1: Example output from show ip dhcp binding
Related
commands
network (DHCP)
Command
changes
Version 5.5.2-0.1: command added
awplus#show ip dhcp binding Campus-1 

Pool Campus-1 Network 192.168.2.0/24 
DHCP Client Entries 
IP Address ClientId Type Expiry 
------------------------------------------------------------------- 
192.168.2.5 office-pc-21 Static Infinite 


awplus#show ip dhcp pool Campus-1 
Pool Campus-1 : 
subscriber-id substition for client-id is enabled 
network: 192.168.2.0/24 
address ranges: 
addr: 192.168.2.50 to 192.168.2.100 
static host addresses: 
addr: 192.168.2.5 Client-id: office-pc-21 
lease <1:0:0:0> 
subnet mask: 255.255.255.0 (pool's network mask) 
dns servers: 192.168.2.2 
default-router(s): 192.168.2.2 
Probe: Default Values 
Status: Enabled [Enabled] 
Type: Ping [Ping] 
Packets: 5 [5] 
Timeout: 200 msecs [200] 
Dynamic addresses: 
Total: 51 
Leased: 0 
Utilization: 0.0 % 
Static host addresses: 
Total: 1 
Leased: 1