General safety instructions
10
GreenDrill BAH0054-9 11.17
2 General safety instructions
This section contains supplementary information on the safety advice in the operating manual to en-
sure safe operation of the implement.
2.1 Obligations and liability
Comply with the instructions in the operating manual
Knowledge of the basic safety information and safety regulations is a basic requirement for safe han-
dling and fault-free implement operation.
Obligations of the operator
The operator is obliged only to let those people work with/on the implement who
are aware of the basic workplace safety information and accident prevention regulations.
have been instructed in working with/on the implement.
have read and understood this operating manual.
The operator is obliged
to keep all the warning symbols on the implement in a legible state.
to replace damaged warning symbols.
If you still have queries, please contact the manufacturer.
Obligations of the user
Before starting work, anyone charged with working with/on the implement is obliged
to comply with the basic workplace safety instructions and accident prevention regulations.
to read and understand the section "General safety information" of this operating manual.
to read the section "Warning symbols and other labels on the implement" in this operating manu-
al and to follow the safety instructions represented by the warning symbols when operating the
implement.
to get to know the implement.
to read the sections of this operating manual, important for carrying out your work.
If the user discovers that a function is not working properly, then they must eliminate this fault immedi-
ately. If this is not the task of the user or if the user does not have the appropriate technical
knowledge, they should report this fault to their superior (operator).
To Next Page
Loading...
