Seeding tables
GreenDrill BAH0054-9 11.17
107
9 Seeding tables
The seeding table values are reference values
that can change due to grain shape, grain size, thousand grain
weight, and dressing. The exact seeding shaft speed for the re-
quired spread rate is derived from the calibration values.
for implements with 8 seed hose lines. If your implement has
6 seed hose lines, the spread rate is reduced accordingly.
and were determined at brush lever position "0".
(see section "Scraper", page 35).
Perennial rye
Spread rate
Barley
Spread rate
Seeding shaft speed [%] kg/min. Seeding shaft speed [%] kg/min.
2 0.46 2 0.54
5 0.99 5 0.87
10 1.87 10 1.41
15 2.74 15 1.96
20 3.62 20 2.51
25 4.50 25 3.06
30 5.33 30 3.61
35 6.16 35 4.16
40 6.98 40 4.71
45 7.81 45 5.26
50 8.64 50 5.81
55 9.45 55 6.70
60 10.27 60 7.59
65 11.08 65 8.48
70 11.89 70 9.38
75 12.71 75 10.27
80 13.44 80 11.16
85 14.18 85 12.05
90 14.92 90 12.95
95 15.14 95 13.84
100 18.10 100 14.73
Seed metering wheel
G-G-G
Seed metering wheel G-G-G
To Next Page
Loading...
