GreenDrill control terminal 5.2
GreenDrill BAH0054-9 11.17
83
7.15 Fill level control
A low level sensor (1) monitors the seed level in
the seed hopper.
If the seed level reaches the low level sensor, an
acoustic signal is emitted. At the same time, the
control terminal displays a warning message.
This warning message is intended to remind the
tractor driver to refill the seeds in due time.
The height of the low level sensor is adjustable
when the seed hopper is empty.
The intensity of the sensor can be changed with
the small sensor bolt (2).
The fastening height of the low level sensor depends on the filled material.
Cereals and legumes:
attach the sensor in the upper area.
Fine seed types (e.g., rapeseed):
Fasten the sensor in the lower area.
To Next Page
Loading...
