GreenDrill control terminal 3.2
GreenDrill BAH0054-9 11.17
55
6.5 Adjusting the blower fan speed (electric blower fan drive)
1. Press and hold the button for 2 seconds.
The display flashes the current blower fan speed.
2. Enter the desired blower fan speed with the
buttons (e.g. 60 %).
3. Save the entry with the
or button.
The display shows the current seeding shaft speed.
The blower fan speed of the electrically driven blower fan can also be
adjusted, as described above, during operation.
6.6 Adjusting the blower fan speed (hydraulic blower drive)
The section "Hydraulic blower fan drive", page 47, describes the adjustment of the blower fan speed.
To Next Page
Loading...
