Layout and function
GreenDrill BAH0054-9 11.17
39
A measurement strip with a scale shows the
housing temperature [°C] of the hydraulic motor.
With increasing temperature (from 71°C to
110°C), the scale becomes black.
4.3.3 GreenDrill GD500-D without blower fan drive
The GreenDrill GD500-D is not equipped with a blower fan. The air current for the GreenDrill GD500-D
is produced by the blower fan of the carrying implement.
The blower fan speed depends on the carrying implement. Set the blower fan speed as described in
the operating manual for the carrying implement.
4.4 Transport safety bar for the carrying implement
With ex-factory deliveries, the brackets for the
transport safety bar can be mounted differently
than described in the operating manual for your
carrying implement.
If you attach the GreenDrill subsequently onto
the carrying implement based on the assembly
instructions, it may be necessary to reposition
the brackets for the transport safety bar.
The displaced parking position of the transport
safety bar (1) on the rigid implements Cenius and
Catros with mounted GreenDrill is shown.
To Next Page
Loading...
