Amazone GreenDrill GD200-E - Submenus; Set Language

GreenDrill control terminal 5.2
68
GreenDrill BAH0054-9 11.17
7.4 Submenus
With the buttons, the following submenus can be called up from the main menu:
1. Language
2. Operating voltage
3. Hectare counter
4. Working hour counter
5. Emptying the seed hopper
6. Calibration (kg/ha or grains/m
2
)
7. Calibration (pulses/100 m)
8. Set the blower fan speed.
If no button is pressed, the display switches to the main menu after
approx. 60 seconds.
7.5 Set language
1. Call up the submenu using the buttons.
2. Confirm the selection with the
button.
3. Select the desired language with the buttons.
4. Confirm the selection with the
button.
5. Back to the main menu with the
buttons.