Product description
GreenDrill BAH0054-9 11.17
29
3.4 EC Declaration of Incorporation
AMAZONE delivers the GreenDrill catch crop
seed drill (1) together with the fitting assembly
set (2) for the carrying implement. With the deliv-
ery of the carrying implement, the GreenDrill is
already mounted or is then mounted in a special-
ist workshop based on the supplied instructions.
In this operating manual in the section "Intended
use" (see page 27), a list of all carrying imple-
ments that are approved for mounting the Green-
Drill are listed. The GreenDrill is marked for this
use with the CE mark and the declaration of con-
formity.
If you have purchased the GreenDrill (1) without
an assembly set, it is considered as an incom-
plete implement. Without the assembly set, the
GreenDrill is marked with a factory plate (see be-
low) and an EC Declaration of Incorporation is
included. The EC Declaration of Incorporation
states that the product fulfills the relevant basic
safety and health requirements of the EC Di-
rective as well as the requirements of the EMC
Directive.
The operator is responsible for the proper mount-
ing of the GreenDrill onto the carrying implement
and for compliance with the standards and legal
requirements.
The operator must ensure that the GreenDrill is operated without danger. This may include a suitable
platform for safe operation of the GreenDrill. The platform must also be easily accessible. This may
require the installation of steps.
Any danger for persons due to the mounting of the GreenDrill on the carrying implement must be ruled
out in all situations.
NOTE
AMAZONE is not liable for damage caused by faulty mounting and
improper operation of the GreenDrill.
The factory plate contains the
(1) Serial number
(2) Type
(3) Factory
To Next Page
Loading...
