General safety instructions
GreenDrill BAH0054-9 11.17
17
2.13 Warning symbols and other labels on the implement
Always keep all the warning symbols of the implement clean and in a
legible state. Replace illegible warning symbols. You can obtain the
warning symbols from your dealer using the order number (e.g.,
MD 075).
Warning symbols - Layout
Warning symbols indicate danger areas on the implement and warn against residual dangers. At these
points, there are permanent or unexpected dangers.
A warning symbol consists of two fields:
Field 1
is a symbol describing the danger, surrounded by triangular safety symbol.
Field 2
is a symbol showing how to avoid the danger.
Warning symbol - Explanation
The Order number and explanation column provides an explanation of the adjacent warning symbol.
The description of the warning symbols is always the same and specifies, in the following order:
1. A description of the danger.
For example: risk of cutting.
2. The consequence of non-compliance with the risk avoidance instructions.
For example: causes serious injuries to fingers or hands.
3. The risk avoidance instructions.
For example: only touch implement parts when they have come to a complete standstill.
To Next Page
Loading...
