Amazone GreenDrill GD200-E - 5 Settings before Commissioning

Settings before commissioning
40
GreenDrill BAH0054-9 11.17
5 Settings before commissioning
DANGER
Danger of crushing, shearing, cutting, being caught or drawn in,
winding and knocks through:
 unintentional lowering of the implement raised using the
tractor's 3-point hydraulic system.
 unintentional lowering of raised, unsecured implement
parts.
 unintentional start-up and rolling away of the tractor-
implement combination.
Before working on the implement
 unfold the combination (if necessary)
 switch off the components of the implement
 wait until the implement comes to a standstill
 position the combination on a firm, horizontal surface
 switch off the control terminal.
Risk of accident due to unintentional activation of the metering
unit or other implement components caused by radar pulses.
 Apply the tractor parking brake, switch the tractor engine off and
remove the ignition key.
 Secure the tractor and implement against unintentional start-up
and rolling away.
 Never crawl under a raised, unsecured implement.
 Mount protective equipment, which you removed when cleaning,
maintaining and repairing the implement.
 Replace defective protective equipment with new equipment.
DANGER
Risk of crushing, cutting, being trapped or drawn in, or impact
through inadequate roadworthiness and operational safety.
Before starting up the machine and tractor, always check their road-
worthiness and operational safety.
DANGER
Dressing dust is toxic and must not be inhaled or come into con-
tact with the body.
When filling and emptying the seed hopper, when calibrating, and
when removing dressing dust, e.g. with compressed air, wear a pro-
tective suit, face mask, safety goggles and gloves.