Amazone GreenDrill GD200-E - Faults

GreenDrill control terminal 3.2
58
GreenDrill BAH0054-9 11.17
6.10 Faults
DANGER
Before eliminating a fault
 Read and observe the "Faults" section in the operating manual
for the carrying implement
 Position the combination on a firm, horizontal surface
 Switch off the seeding shaft and blower fan of the GreenDrill
 Switch off the GreenDrill control terminal.
Risk of accident due to accidental starting up of the blower fan
or metering unit.
 Apply the tractor parking brake, switch the tractor engine off and
remove the ignition key
 Secure the tractor and implement against unintentional start-up
and rolling away.
Is displayed on the screen after switching on the control terminal, if there is no display, check
 whether the power cable is properly attached
 to the control terminal
 in the tractor socket
 the fuse in the control terminal
 the cable connections on the battery poles,
if the standard socket is connected to the tractor battery.