Amazone GreenDrill GD200-E - Blower Fan Drive; Seeding Shaft Signal Tone; Implement Wheel Sensor; Tractor or Guide Wheel Sensor

GreenDrill control terminal 5.2
100
GreenDrill BAH0054-9 11.17
7.20.2 Blower fan drive
Setting with electric blower fan drive: ........................... YES
Setting with hydraulic blower fan drive: ........................ NO
Change the parameters using the
buttons.
7.20.3 Seeding shaft signal tone
An acoustic warning tone is issued when the seeding shaft is
switched on and off.
YES or NO
Change the parameters using the
buttons.
7.20.4 Implement wheel sensor
The forward speed signals come from a sensor on the wheel of the
implement on which the GreenDrill is mounted.
YES, NO or AUTO
"AUTO" automatically detects whether work is being performed with
or without implement running wheel.
Change the parameters using the
buttons.
7.20.5 Tractor or guide wheel sensor
The forward speed signals come from the sensor on the tractor
wheel or a guide wheel on the implement on which the GreenDrill is
mounted.
YES, NO or AUTO
"AUTO" automatically detects whether work is being performed with
or without the speed sensor of the tractor.
Change the parameters using the
buttons.