General safety instructions
14
GreenDrill BAH0054-9 11.17
2.6 User training
Only those people who have been trained and instructed may work with/on the implement. The opera-
tor must clearly specify the responsibilities of the people charged with operation and maintenance
work.
People being trained may only work with/on the implement under the supervision of an experienced
person.
Person
Job
Person explicitly
trained for the ac-
tivity
1)
Instructed
person
2)
Persons with
specialist
training (specialist
workshop)
3)
Loading/Transport X X X
Start-up
X
Set-up, tool installation
X
Operation
X
Maintenance
X
Troubleshooting and fault elimina-
tion
X X
Disposal X
Legend: X..permitted ..not permitted
1)
A person who can assume a specific task and who can carry out this task for an appropriately
qualified company.
2)
Instructed persons are those who have been instructed in their assigned tasks and in the possi-
ble risks in the case of improper behaviour, have been trained if necessary, and have been in-
formed about the necessary protective equipment and measures.
3)
Persons with specialised technical training shall be considered as a specialist. Due to their spe-
cialised training and their knowledge of the applicable regulations, they can evaluate the work
with which they have been tasked and detect possible dangers.
Comment:
A qualification equivalent to specialist training can be obtained from several years' experience in
the relevant field.
Only a specialist workshop may carry out maintenance and repair
work on the implement, if such work is additionally marked "Work-
shop". The personnel of a specialist workshop shall possess the ap-
propriate knowledge and suitable aids (tools, lifting and support
equipment) for carrying out the maintenance and repair work on the
implement in a way which is both appropriate and safe.
To Next Page
Loading...
