Amazone GreenDrill GD200-E - Page 22

General safety instructions
22
GreenDrill BAH0054-9 11.17
Use of the implement
 Before starting work, make sure that you understand all the equipment and control elements of
the implement and their functions. It is too late for this when the implement is already in opera-
tion.
 Wear tight-fitting clothing. There is an increased risk of loose clothing getting caught or entangled
on drive shafts.
 Only put the implement into operation after all protective devices have been attached and are in
protective position.
 Comply with the maximum load of the mounted/towed implement and the permissible axle and
drawbar loads of the tractor. If necessary, drive only with a partially filled hopper.
 It is forbidden to stand in the working area of the implement.
 It is forbidden to stand in the turning and swivel range of the implement.
 There are crushing and shearing hazards on implement parts actuated by external force (e.g. hy-
draulically).
 Only operate implement parts actuated by external force if bystanders are maintaining an ade-
quate safety distance to the implement.
 Secure the tractor against unintentional start-up and rolling away before you leave the tractor.
For this:
 Lower the implement onto the ground.
 Apply the parking brake
 Switch off the tractor engine.
 Remove the ignition key.