Chapter 3 Software Navigation
Page 114 of 314 Part Number: 0160-6411, Rev A, 02/2019
Software Release: cOS 5.00
• Anterior/Posterior Line Distance—region that line density is applied to the respective cut
segment, measured in microns or percentage of corneal thickness, depending on Depth
Unit setting; used to adjust the spot spacing from the anterior/posterior portion of the
incision to the central portion of the incision. For example, if the anterior plane depth is
40% of the corneal thickness and the anterior line distance is 30%, the anterior-most 30%
of the anterior plane will be at the anterior line density and the remaining 10% of the
anterior plane will be at central line density.
• Horizontal Spot Spacing—lateral spot-to-spot spacing
• Vertical Spot Spacing—axial spot-to-spot spacing
• Pulse Energy—energy delivered per pulse
Press the button to go to the Cataract Incisions Primary Laser Details Screen, the BASIC
button to return to the Cataract Incisions (Basic) Screen, the BACK button to return to the (Basic)
Screen for the previous procedure in the sequence, or the NEXT button to proceed to the
Treatment Plan Summary Screen.
NOTES
If you selected only the cataract incisions procedure on the Plan a Treatment Screen, pressing the
BACK button on any of the Cataract Incisions Details Screens will take you back to the Plan a
Treatment Screen.
If you press the HOME button on any of the Cataract Incisions Details Screens, the current
treatment parameters will be saved.
To Next Page
