Chapter 3 Software Navigation
Part Number: 0160-6411, Rev A, 02/2019 Page 145 of 314
Software Release: cOS 5.00
Adjust Lens Fragmentation Screens
To adjust the lens fragmentation parameters after performing INTEGRAL GUIDANCE System
imaging, press the EDIT button on the Lens Fragmentation Incision Review Screen to go to the
Adjust Lens Fragmentation (Basic) Screen.
Figure 3.102 Adjust Lens Fragmentation (Basic) Screen
Adjust the desired parameters on the Adjust Lens Fragmentation (Basic) Screen, and then press
the DETAILS button to proceed to the Adjust Lens Fragmentation Details Screen. Alternatively,
you can select an icon from the Quick Navigation Bar to go to the Incision Adjustment Screens
for the corresponding incision or press the DONE button to return to the Lens Fragmentation
Incision Review Screen.
Go to Lens
Fragmentation
Incision Review
Screen
Go to Adjust Lens
Fragmentation
Details Screen
Quick Navigation Bar
To Next Page
Loading...
