Part Number: 0160-6411, Rev A, 02/2019 Page 205 of 314
Software Release: cOS 5.00
5 Maintenance
This chapter addresses the following major topics:
• 5.1 System Cleaning, page 205
• 5.2 System Maintenance, page 205
• 5.3 Electromagnetic Compatibility, page 206
• 5.4 Bluetooth Characteristics, page 212
• 5.5 System Error Codes, Faults, and Messages, page 214
• 5.6 Calibration Disclaimer, page 218
• 5.7 Warranty, page 218
• 5.8 Company Information, page 218
• 5.9 Copyrights for Integrated Software Libraries, page 218
• 5.10 Decontamination of Returned Equipment, page 219
5.1 System Cleaning
The CATALYS® System should be cleaned daily after use. Acceptable cleaning methods include
wiping down the system with a clean cloth and diluted isopropyl alcohol.
WARNINGS
Do not use caustic cleaners or strong detergents when cleaning the CATALYS® System.
Allow isopropyl alcohol to dry completely before using the CATALYS® System.
5.2 System Maintenance
The CATALYS® System is a delicate medical instrument and requires regular maintenance to
provide optimum performance. OPTIMEDICA recommends annual system maintenance for the
CATALYS® System. System maintenance must be completed by trained OPTIMEDICA Service
Personnel. There are no user service adjustments on the CATALYS® System. Contact
OPTIMEDICA Service for system service and repair.
NOTE
OPTIMEDICA will make available on request circuit diagrams, component part lists, descriptions,
calibration instructions, or other information that will assist Service Personnel to repair those
parts of the system that are repairable by Service Personnel. Possession of service information
does not authorize repair or modification by uncertified personnel.
To Next Page
