Appendix A – Chapter 2 Mobile Patient Bed Operation
Part Number: 0160-6411, Rev A, 02/2019 Page 259 of 314
Software Release: cOS 5.00
• Partially filled orange—Mobile Patient Bed is connected to CATALYS® System but battery
power is low; sufficient power for one treatment
• Partially filled red—Mobile Patient Bed is connected to CATALYS® System but battery
power is critically low; connect to AC power source immediately
• Solid gray—Mobile Patient Bed is not connected to CATALYS® System
• Rapidly blinking blue—Mobile Patient Bed has been disconnected from CATALYS®
System during procedure
When the Mobile Patient Bed is connected to the CATALYS® System, the name of the bed
displays next to the (Bluetooth connection status) icon on the CATALYS® System
touchscreen.
2.7 Disconnecting the Bed from the CATALYS® System
Refer to Disconnecting the Mobile Patient Bed from the CATALYS® System on page 203 for
instructions on disconnecting the bed from the CATALYS® System, including emergency patient
egress.
To Next Page
Loading...
