Analytik Jena SPECORD S600 User Manual

Cell changer
6-cell changer
24 Edition 09/2014 SPECORD S600 accessories
11 6-cell changer
The 6-cell changer is an automatic sample changing system for max. 6
standard cells. The linear layout of the cells in the sample block ensures that all
cells are radiated with the same optical conditions. This leads to a high
measuring accuracy and a very good reproducibility between measuring
positions.
Design versions
The 6-cell changer is supplied in the following designs:
• Cell changer for cells with variable path length, sample block for cells with
10, 20, 40 and 50 mm path length, non-thermostated, without stirrer
• Cell changer for cells with 10 mm path length, thermostated via external
thermostats
• Cell changer for cells with 10 mm path length, thermostated via external
thermostats and magnetic stirrer
Layout
1 Cell block
2 Slide
3 Step motor
4 Base plate with guide
rails
5 Interface cable to
SPECORD S600
Fig. 11-1 6-cell changer for cells with variable path length

Analytik Jena SPECORD S600 Specifications

General

Brand	Analytik Jena
Model	SPECORD S600
Category	Measuring Instruments
Language	English