Peltier-tempered accessories
General safety instructions for Peltier-tempered accessories
SPECORD S600 accessories Edition 09/2014 37
15 Peltier-tempered accessories
15.1 General safety instructions for Peltier-tempered
accessories
The following safety instructions apply to all Peltier-tempered accessories:
Warning! Electric shock at the temperature control unit and heat
exchanger!
Disconnect the mains plug before opening the device or removing the covers!
Components carrying mains or high voltages may be exposed.
The mains plug must only be inserted into a shock-proof socket to guarantee
protection class I (protective conductor connection) for the device. The
protective effect must not be invalidated by the use of an extension line which
does not have a protective conductor.
Warning! Correct fuses!
Only fuses of the type specified must be used.
Warning! Do not operate in explosive environments!
Warning! Hot surface!
Allow the cells to cool down sufficiently after operation before changing them!
There is a risk of burns.
Caution! Heat build-up!
Heat build-up can cause overheating and faults in the device.
Ensure that the air vents of the temperature control unit are kept
unobstructed!
Caution! Water!
Prevent any liquid from entering the control unit. The device could be
damaged.
In particular, do not place any glasses or other containers with liquid on the
device.
When working with watery systems at temperatures below freezing there is a
risk of destroying the cells due to the expansion of the ice.
If you place the control unit and heat exchanger on top of each other, place
the control unit on top of the heat exchanger.
To Next Page
Loading...
Need help?
General
