Analytik Jena SPECORD S600 User Manual

Peltier-tempered accessories
Peltier tempered 6- and 8-cell changers
SPECORD S600 accessories Edition 09/2014 53
Layout of the cell changer
1 Connection to the heat exchanger
2 Connections to the temperature control unit
3 Drive unit with step motor
4 Connection socket for cell sensor in
storage position
5 Water hoses
6 Cell block with insulation (with 6 or 8
cell positions)
7 Stop bolt
8 Connection to SPECORD S600
Fig. 15-10 Layout of the Peltier-tempered cell changer
15.4.2 Installing the cell changer in the sample chamber
Fig. 15-11 Peltier-tempered cell changer installed in the SPECORD S600
Lay the connection cables tension-free!
The connection cables and water hoses must be laid tension-free and must
not impede the movements of the cell holder during operation.

Analytik Jena SPECORD S600 Specifications

General

Brand	Analytik Jena
Model	SPECORD S600
Category	Measuring Instruments
Language	English