Analytik Jena SPECORD S600 User Manual

Peltier-tempered accessories
Peltier temperature-controlled cell holder, air-cooled
42 Edition 09/2014 SPECORD S600 accessories
For temperature control the three temperature modes Fix temperature mode,
Simultaneous and Cyclic temperature mode are available:
Mode Description
Fix
Activation of a constant temperature. The measurement is
taken after the target temperature has been reached.
Simultaneous
Performs heating up and cooling down from a starting
temperature to a final temperature at specified heating or
cooling rate.
Measured values are recorded at constant temperature
intervals.
Cyclic
Activation of defined temperature values (max. 200). The
measurement is taken when the temperature has been
reached.
The temperature control is optionally carried out via the sensor in the cell block
or the cell sensor (also set the change-over switch at the temperature control
unit accordingly).
Fix temperature control
Fig. 15-5 Measuring parameter configuration for Peltier-tempered cell holders -
temperature control: Fix

Analytik Jena SPECORD S600 Specifications

General

Brand	Analytik Jena
Model	SPECORD S600
Category	Measuring Instruments
Language	English