Analysis of solid samples
Reflection measuring attachment 11° - 60°
84 Edition 09/2014 SPECORD S600 accessories
Care and maintenance
Caution! Sensitive optical mirrors!
Work with care and avoid the contamination of the mirrors. Do not touch the
mirrors! This could damage them!
Observe the following maintenance instructions:
• Keep all mirrors of the attachment free from dust and grease! Do not
touch the mirrors with your fingers!
• Remove dust particles on the mirrors with a soft, clean and grease-free
brush.
• Remove traces of grease on the mirror by wiping the mirrors carefully and
without applying pressure with a cotton pad soaked in distilled water and
curd soap.
Rewipe with a fresh cotton pad and distilled water.
Dab the metal frames dry afterwards.
• Only transport and store the attachment in the sealed container.
To Next Page
Loading...
Need help?
General
