2-4 Front Panel Overview Instrument Overview
2-6 PN: 10580-00250 Rev. K Cell Master UG
Submenu Touch Screen Keys
These submenu keys are arranged along the right-hand edge of the touch screen. The
submenu labels change as instrument measurement settings change. The current submenu
title is shown at the top of the submenu key block.
Keypad Menu Keys (1 to 9)
Pressing the Shift key and then a number key selects the menu function that is printed in
blue characters above the number key. See Figure 2-1 on page 2-2.
Not all Secondary Function Menus are active in various measurement modes. If any one of
these menus is available in a specific instrument mode of operation, then it can be called from
the number keypad. It may also be available from a main menu key or a submenu key.
The Preset Menu (1) and System Menu (8) are described in Chapter 5, “System Operations ”.
The Sweep Menu (3), Measure Menu (4), Trace Menu (5), and Limit Menu (6) vary depending
on measurement mode, see the Measurement Guides listed in Appendix A for information.
The File Menu (7) is described in Chapter 4, “File Management”. The Mode Menu (9) is
described in “Mode Selector Menu” on page 2-16.
LED Indicators
Power LED
The Power LED is located to the left of the On/Off key. The LED is solid green when the unit
is on and slowly blinks when the unit is off but has external power.
Charge LED
The Charge LED is located to the right of the On/Off key. The LED slowly blinks when the
battery is charging and is solid green when the battery is fully charged.
To Next Page
Loading...
