5-3 System Menu System Operations
5-6 PN: 10580-00250 Rev. K Cell Master UG
Reset Menu
Key Sequence: Shift, System (8) > System Options > Reset
Factory Defaults: Restores the instrument to the factory default values,
including language, volume, brightness setting, and user created shortcut
icons on the Menu screen. Press the Enter key to initiate the reset, and
power-cycle the instrument.
Master Reset: In addition to the functions described in Factory Defaults
above, all user files in the internal memory are deleted, and the original
language and antenna files are restored. Press the Enter key to initiate the
Master Reset and power-cycle the instrument. Press Esc to return to normal
operation without resetting.
Update Firmware: Press this submenu key to update the instrument
operating system with a USB memory device. Press Enter and follow the
onscreen instructions to update the firmware or press Esc to return to normal
operation without updating. Refer to “Updating the Cell Master Firmware”
on page 5-8 for additional information on firmware update options.
Back: Press this submenu key to return to the “System Options Menu”
on page 5-4.
Figure 5-6. Reset Menu
Back
Reset
Factory
Defaults
Master
Reset
Update
Firmware
To Next Page
Loading...
