Anritsu MT8212E - ISDB-T SFN Verification, Option 32; Introduction

Option Verification 5-6 ISDB-T SFN Verification, Option 32
MT8212E and MT8213E MM PN: 10580-00255 Rev. J 5-19
5-6 ISDB-T SFN Verification, Option 32
Introduction
The tests in this section verify the performance of the optional ISDB-T SFN Analyzer option of the MT821xE.
These tests include:
• “Level Accuracy Verification” on page 5-20
• “Displayed Average Noise Level (DANL) Verification” on page 5-24
Equipment Required
• Anritsu MG3700A Vector Signal Generator
• Anritsu MN63A Programmable Attenuator
• Anritsu ML2438A Power Meter
• Anritsu MA2482D Power Sensors (2)
• Anritsu 1N50C RF Limiter
• Anritsu 34NN50A Adapter
• Anritsu 15NNF50-1.5C RF Coaxial Cables (3)
• Aeroflex/Weinschel 1870A Power Splitter
• Aeroflex/Weinschel 44-10 10 dB Fixed Attenuator
• Mini-Circuits TIA-1000-1R8 RF Power Amplifier
• Midwest Microwave ADT-2615-NF-BNM-02 Adapters (2)