Anritsu MT8212E - BER Measurement Functional Check, Option 57 Only

5-16 DVB-T/H Signal Analyzer Verification, Options 64 and 57 Option Verification
5-86 PN: 10580-00255 Rev. J MT8212E and MT8213E MM
BER Measurement Functional Check, Option 57 Only
This section provides the procedures to check the functionality of the BER measurement hardware that is
included with Option 57 in the Cell Master Base Station Analyzer.
Equipment Required:
• Anritsu MG3700A Vector Signal Generator
• Power Meter, Anritsu Model ML2438A
• Anritsu MP8931A Bit Error Rate Tester
• Power Splitter, Aeroflex⁄Weinschel Model 1870A
• Power Sensor, Anritsu Model MA2482D
• Adapter, Anritsu Model 34NN50A
• RF Coaxial Cable, Anritsu Model 15NN50-1.5C
• RF Coaxial Cable, BNC-to-BNC, 75 ohm, Anritsu Model 3-806-169