Anritsu MT8212E - WCDMA;HSDPA Signal Analyzer Verification, Options 44, 45, 65; WCDMA Absolute Power Accuracy Verification (Option 44)

Option Verification 5-9 WCDMA/HSDPA Signal Analyzer Verification, Options 44, 45, 65,
MT8212E and MT8213E MM PN: 10580-00255 Rev. J 5-35
5-9 WCDMA/HSDPA Signal Analyzer Verification, Options 44, 45, 65,
Option 44 and Option 45 or Option 65
The tests in this section verify the optional WCDMA Signal Analyzer functions in Anritsu Model MT821xE
Cell Master. The tests are as follows
• “WCDMA Absolute Power Accuracy Verification (Option 44)”
• “WCDMA Occupied Bandwidth (OBW) Verification (Option 44)” on page 5-40
• “WCDMA RF Channel Power Accuracy (Option 44)” on page 5-43
• “HSDPA RF Channel Power Accuracy (Option 44)” on page 5-45
• “Error Vector Magnitude (EVM) Verification (Option 45 or 65) ” on page 5-47
WCDMA Absolute Power Accuracy Verification (Option 44)
This test verifies the WCDMA absolute power accuracy in WCDMA/HSDPA Signal Analyzer Mode in the
Model MT821xE Cell Master.
Equipment Required
• Anritsu MG3700A Vector Signal Generator
• Mini Circuits Model TIA-1000-1R8 RF Power Amplifier
• Anritsu PN 1000-50 Circulator
• Aeroflex/Weinschel Model M1418 High Power Load
• Anritsu PN 1091-307 Coupler
• Anritsu ML2438A Power Meter
• Anritsu MA2482D Power Sensor (2)
• Anritsu 15NN50-1.5C RF Coaxial Cable (3)
• Aeroflex/Weinschel 1870A Power Splitter
• Anritsu Model MN63A Programmable Attenuator