1-2 PN: 10580-00241 Rev. B Cable & Antenna Analyzer MG
1-3 General Measurement Setups
The User Guide for your instrument provides a general overview of file management, system
settings, and GPS. Chapter 2 of this guide provides specific setup, measurement, and menu
information for cable and antenna measurements.
1-4 Selecting the Cable and Antenna Mode
The current measurement mode is displayed on screen below the battery symbol. To change
to Cable & Antenna Analyzer measurement mode.
• Press the Menu key and select the Cable-Antenna Analyzer icon using the touch screen.
or
1. Press the Shift key followed by pressing the Mode (9) key on the numeric keypad to open
the Mode Selector list box.
2. Use the directional arrow keys, touchscreen, or the rotary knob to highlight the mode,
and press the Enter key to select.
Refer to your User Guide for additional information.
To Next Page
Loading...
